GSO ISO 5948:2013
Gulf Standard
Current Edition
·
Approved on
09 September 2013
·
Railway rolling stock material -- Ultrasonic acceptance testing
GSO ISO 5948:2013 Files
English
7 Pages
Current Edition
Reference Language
You can buy this standard from any member store
GSO ISO 5948:2013 Scope
This International Standard specifies the testing conditions and the acceptance standard for ultrasonic acceptance tests for the components and types of tests covered in table 1, columns 1 to 6.
Unless otherwise agreed, this International Standard shall be applied when the product standards require mandatory ultrasonic tests or when the ordered optional tests are made mandatory (see ISO 1005-1, ISO 1005-3 and ISO 1005-6).
NOTE 1 Following the revision of ISO 1005-6, ultrasonic acceptance tests are mandatory for all wheels of testing category B, but optional for all wheels of testing category A. According to ISO 1005-1 and ISO 1005-3, ultrasonic acceptance tests on tyres and axles are optional in every case.
Best Sellers From Mechanical Sector
GSO 42:2015
Gulf Technical Regulation
MOTOR VEHICLES - GENERAL REQUIREMENTS
GSO 159:1993
Gulf Technical Regulation
MOTOR VEHICLES –
DIMENSIONS AND WEIGHTS
GSO 98:1988
Gulf Technical Regulation
MOTOR VEHICLES- FLAMMABILITY OF
INTERIOR MATERIALS AND THEIR
TESTING METHODS
GSO 1780:2010
Gulf Technical Regulation
Motor vehicle-vehicle identification number (vin) - requirements
Recently Published from Mechanical Sector
GSO ASTM D4778:2024
ASTM D4778:15
Gulf Standard
Standard Test Method for Determination of Corrosion and Fouling Tendency of Cooling Water Under Heat Transfer Conditions (Withdrawn 2024)
GSO ISO 21384-2:2024
ISO 21384-2:2021
Gulf Standard
Unmanned aircraft systems — Part 2: UAS components
GSO ISO 11114-6:2024
ISO 11114-6:2022
Gulf Standard
Gas cylinders — Compatibility of cylinder and valve materials with gas contents — Part 6: Oxygen pressure surge testing
GSO ISO 23598:2024
ISO 23598:2021
Gulf Standard
Mechanical joining of sheet materials — Destructive testing of joints — Specimen dimensions and procedure for mechanized peel testing of single joints